The TRE08 is a high-performance temperature ontroller for supplying long heated hoses for extensive multiple samples or even precise monitoring of multiple control circuits.

The TRE08 is far more than just a temperature controller. This is partly because of its enormous performance capability – up to 63A total power consumption on 8 control circuits – and partly because of its versatility in terms of control tasks and communications options. The 8 PID control circuit can safely and precisely manage heated lines, heated/cooled lines, heated sample gas pumps or whatever else is required. Even special tasks such as fast adjustments, parameter switching etc can be carried out using the TRE08.

LikeallIAGnGmodules,theTRE08canalsobecontrolledandconfigured in a wide variety of ways. If active control is needed (such as for controlling an HKL), this can be done either via bit parallel or via Modbus TCP. Depending on the configuration, the TRE08 has up to 8 freely programmable digital outputs that can be used for controlling an MSJ junction unit, for example.

If the TRE08 is connected to an IAG nG measuring unit, it will be displayed in the measuring units display and can be fully monitored and configured from there. In the simplest case, the TRE08 can carry out its control functions fully autonomously and can display any interference as a digital signal. Parameterisation is then carried out either via a system control panel (SCP) or with an extremely handy configuration software package via Modbus TCP.

Technical specifications
Dimensions (mm)
L 460
W 460
H 255
Temperature Controller
PID Controller, 8 Control Circuits
Via Modbus TCP or via System Control Panel (SCP)
Modbus TCP, AK TCP, Digital Input
via Sub-D or System Control Panel (SCP)
Pin Assignment
Pins 1, 2, 3 - Digital in
Pin 6 - Com
Alarm Output
Sub-D (9-Pin), Pins 7, 8, 9 - NO/NC
3A Heat Supply
693 6+Pe Flange Socket Connector
15A Heat Supply
694 4+Pe Flange Socket Connector
Standard Pin Assignment
Sub-D (15-Pin)
Power Supply
400V/32Aor63ACEE, 3m/Schuko
Max. 4 x 3 A + 4 x 15 A
8 Control Circuits max. 4 x 3 A + 4 x 15 A
Control of Heated/Cooled Lines
Control of Sample Gas Pumps
Bit Parallel Control
Control of an IAG nG MSJ
Pt100 Temperature Sensor
IAG Prüfstandstechnik GMBH
Industriestrasse 322
A-2722 Weikersdorf
Austria / Europe
+43 2622 41712
© 2024